|
Functions and applications:
- To measure the Pulse Width transmitted by Transmitter for up to 9 channels.
- To measure the Pulse Width sent from Receiver.
- To test the rotations of Servo automatically – at the pulse widths of top, medium and low points set by user already.
- To test the automatic rotations of Servo.
- To test the rotations of Servo by turning the knob on the tester manually .
- To test the sensitivity of Servo (1μS per step minimum).
- To measure RPM of a spinning propeller – for 2 – 6 blades ones, real time RPM value shown／to set the peak RPM value up to 99990 per minute.
- Shiny 4 digits red LED's to display the values measured.
- Power source can be from UM-4 / AAA cell x4, or an adapter with 7-15V or BEC (5V) from an ESC.
- An output port for applying Positive/Negative signals of Pulse Width from this tester.
- Four buttons for setting up functions and modes.
Instruction Manual:
|
